FixVault
Home › Mercury › 1994 › Capri Base, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Testing › Speed Control Does Not Disengage When Brakes Are Applied

Speed Control Does Not Disengage When Brakes Are Applied

  1. Unplug stoplight switch connector, located at brake pedal lever. Measure voltage on Green/Yellow wire at switch connector. If battery voltage exists, go to next step. If battery voltage does not exist, repair Green/Yellow wire to fuse panel.
  2. Reconnect wiring to stoplight switch. Press brake pedal. Measure voltage on White/Green wire at switch connector. If battery voltage exists, go to SPEED CONTROL DOES NOT DISENGAGE WHEN CLUTCH IS RELEASED for M/T models, or SPEED CONTROL INOPERATIVE  for A/T models. If battery voltage does not exist, replace stoplight switch.
About FixVault