FixVault
Home › Mercury › 1994 › Capri Base, Standard › Repair and Diagnosis › Body & Frame › Power Windows › Adjustments › Door Glass Longitudinal

Door Glass Longitudinal

  1. Make sure full length of door glass is seated under lip of weatherstrip when door glass is fully raised. See Door Glass Lateral Adjustment, Step 1 for a graphic. If adjustment is required, go to the next step.
  2. Remove lower door trim panel and water-shields. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION.
  3. Working through openings in door, loosen two regulator-to-glass bolts. See Figure .
  4. Align door glass so it contacts weatherstrip evenly front-to-back and is fully seated in weatherstrip.
  5. Tighten regulator-to-glass bolts to specification. See TORQUE SPECIFICATIONS  .
  6. Lower and raise door glass several times to make sure alignment is correct.
  7. Install water-shields and lower door trim panel. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION.
About FixVault