FixVault

Front Wiper Switch

Unplug multifunction switch connector, located at steering column. Test for resistance or continuity between specified terminals. See WIPER SWITCH TEST table. See Fig 1 . Replace switch if readings are not as specified.

FRONT WIPER SWITCH TEST (1)

Switch Position Terminals 2A To 3A Terminals 1A To 2A
OFF 47,6000 103,300
S 11,300 103,300
F 11,300 3300
LO 4080 3300
HI 0 3300
WASH (2) Less Than 5
(1) All measurements are in ohms. Resistance may vary by 15 percent.
(2) Not applicable.
Fig 1: Identifying Front Wiper Switch Terminals
G94C65005Courtesy of FORD MOTOR CO.