Front Wiper/Washer Switch

Wiper/washer switch is incorporated into multifunction switch on steering column. Disconnect multifunction switch connector. Measure resistance between specified terminals. See FRONT WIPER/WASHER SWITCH TEST table. See Fig 1 . If resistance is not as specified, replace multifunction switch.

FRONT WIPER/WASHER SWITCH TEST ⁽¹⁾

Switch Position

Terminals No. 2 & 3

Terminals No. 1 & 2

OFF

47,6000

103,300

Interval (MIN)

11,300

103,300

Interval (MAX)

11,300

3300

4080

3300

WASH

⁽²⁾

Less Than 5

⁽¹⁾	All measurements are in ohms. Resistance may vary by 15 percent.

⁽²⁾	Not applicable.

Fig 1: Identifying Front Wiper Switch Terminals (Villager)

Courtesy of FORD MOTOR CO.