FixVault

Both Mirrors Inoperative

  1. Fuse Check Check RADIO (15-amp) fuse, located in fuse junction panel. If fuse is good, go to step 4). If fuse is blown, go to next step.
  2. System Check Replace blown fuse. Turn ignition on. Observe fuse. If fuse does not blow, go to step 4). If fuse blows, go to next step.
  3. Short To Ground Check Turn ignition off. Unplug 11-pin connector from interior fuse junction panel. Unplug mirror switch connector. Measure resistance between ground and Blue/Black wire. If resistance is less than 10,000 ohms, repair circuit. If resistance is greater than 10 k/ohms, replace shorted mirror switch.
  4. Power Supply To Mirror Switch Check Ensure ignition is off. Ensure mirror switch is disconnected. Turn ignition on. Measure voltage of Dark Blue/Black wire at mirror switch connector. If voltage is less than 10 volts, repair Dark Blue/Black wire between fuse junction panel and mirror switch connector. If voltage is 10 volts or greater, go to next step.
  5. Mirror Switch Ground Check Turn ignition off. Measure resistance between Black wire at mirror switch connector and ground. If resistance is less than 5 ohms, replace mirror switch. If resistance is 5 ohms or greater, repair open Black wire.