Road Test

Ensure engine and transaxle are at normal operating temperature. Road test vehicle in "D" position. Accelerate vehicle at half throttle until transaxle shifts into overdrive (4th gear). Record shift speeds. Reduce speed and come to a complete stop. Accelerate from stop at full throttle. Record shift speeds. Operate vehicle at full throttle. Record all shift speeds. Monitor shift feel. Ensure transaxle engine braking is felt in "2" and "1" gear. See SHIFT SPEED SPECIFICATION table.
Connect appropriate scan tool to Data Link Connector (DLC). Perform road test as described in step 1) and monitor shift solenoid operation. See TRANSAXLE SHIFT SOLENOID STATUS table. Check clutch and band applications. See CLUTCH & BAND APPLICATIONS table.

SHIFT SPEED SPECIFICATION

Throttle Position & Shift ⁽¹⁾

Shift Speed MPH

Half Throttle

1-2

22-27

2-3

39-44

3-4

63-69

4-3

45-40

3-2

27-22

2-1

10-5

Full Throttle (WOT)

1-2

35-40

2-3

62-67

3-4

103-108

4-3

103-98

3-2

61-56

2-1

31-26

⁽¹⁾	To determine deceleration shift speeds, release throttle once transaxle has shifted into 4th gear (O/D). Manually downshift shift lever into next lower gear and record speed at which downshift occurs. Continue downshifting and recording vehicle speed until transaxle has downshifted into low gear.

TRANSAXLE SHIFT SOLENOID STATUS

CLUTCH & BAND APPLICATIONS

Selector Lever Application		Elements In Use
"R" (Reverse)		Low/Reverse Clutch & Reverse Clutch
"D" (Drive)
1st Gear		Forward Clutch, Forward One-Way Clutch & Low One-Way Clutch
2nd Gear		2-4 Band, Forward Clutch & Forward One-Way Clutch
3rd Gear		Forward Clutch, Forward One-Way Clutch & 3-4 Clutch
4th Gear		2-4 Band, 3-4 Clutch & Forward One-Way Clutch
3rd Gear (OD Off)		Coasting Clutch, Forward Clutch, Forward One-Way Clutch & 3-4 Clutch
"2" (Manual Select)		2-4 Band, Forward Clutch, Forward One-Way Clutch & Coasting Clutch
"1" (Manual Select)		Forward Clutch, Forward One-Way Clutch, Coast Clutch, Low One-Way Clutch & Low/Reverse Clutch