Oil Cooler Flushing
- Allow fluid in flusher to heat up for 15-30 minutes, before using. Install line adapters into transaxle cooler lines.
- Attach Blue line to transaxle return line quick disconnect.
- Attach Clear line to transaxle outlet line quick disconnect.
- Backflush transaxle cooling system for 10 minutes, then flush cooler in a forward, normal flow direction for an additional 10 minutes.
- When transaxle has been reinstalled, always carry out transaxle fluid cooler flow test. See TRANSAXLE FLUID COOLER FLOW TEST .
- Refill transaxle with appropriate fluid. See LUBRICATION .