FixVault
Home › Mercury › 2001 › Villager Base › Repair and Diagnosis › External Pages › Different car › Section 4 (Module Communications Network - F150 Pickup) › Removal & Installation › Generic Electronic Module/Central Timer Module › Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2001 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove lower instrument panel steering column cover. Remove in-line harness connectors from central junction box. Central junction box is located under left side of instrument panel.
  2. Unbolt and remove central junction box. Disconnect generic electronic module/central timer module (GEM/CTM) wiring harness connectors. Remove screws and disconnect GEM/CTM from backside of central junction box. To install, reverse removal procedure.
About FixVault