Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the exterior mirror glass. For additional information, refer to REAR VIEW MIRRORS -- FUSION, MILAN & MKZ article.
- Release the tab to remove the puddle lamp from the mirror housing.
- Rotate the puddle lamp bulb socket approximately one-quarter turn and remove it from the puddle lamp.
- To install, reverse the removal procedure.
NOTE:
The LH puddle lamp bulb socket is rotated clockwise to remove and the RH puddle lamp bulb socket is rotated counterclockwise to remove.
NOTE:
When rotating the bulb socket in the puddle lamp, the socket should come to a stop indicating it is completely installed.
NOTE:
An audible click can be heard when the puddle lamp is fully seated.