FixVault
Home › Mercury › 2002 › Villager Base › Repair and Diagnosis › External Pages › Different car › Section 1848 (Exterior Lighting System) › Removal And Installation › Reversing Lamp › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pin-type retainers and the luggage compartment trim panel.
  2. Disconnect the electrical connector(s).
  3. Remove the 3 nuts (Milan) or 7 nuts (MKZ) and the reversing lamp.
  4. To install, reverse the removal procedure.
About FixVault