FixVault
Home › Mercury › 2002 › Villager Estate › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle/Transmission › In-Vehicle Repair › Vehicle Speed Sensor (VSS) › Removal

Vehicle Speed Sensor (VSS): Removal

  1. Disconnect the battery ground cable.
  2. Raise and support the vehicle. .
  3. Remove the vehicle speed sensor (VSS).
    1. Disconnect the electrical connector.
    2. Remove the bolt.
    3. Remove the VSS.
      Fig 1: Removing Bolt
      G03412252Courtesy of FORD MOTOR CO.
About FixVault