Removal And Installation: Drier: Installation
WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
NOTE:
Inspect the O-ring for damage and install a new O-ring as necessary. Lubricate the solenoid seal area with grease.
NOTE:
When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
NOTE:
Ride height adjustments must be carried out after the air compressor/drier is installed.
NOTE:
When the battery is disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive strategy. The vehicle can need to be driven 16 km (10 miles) or more to relearn the strategy.