FixVault
Home › Mercury › 2004 › Marauder › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel System-General Information › General Procedures › Vapor Tube Fittings › Connect

Vapor Tube Fittings: Connect

  1. Inspect the fitting and the tube for damage.
  2. Remove any dirt or obstructions.
  3. Push the tube into the fitting until it snaps in place.
    Fig 1: Connecting Tube Into Fitting
    G02758186Courtesy of FORD MOTOR CO.
  4. Pull on the connection to make sure the fitting is secure.
    Fig 2: Pulling On Connection For Inspecting Proper Connection
    G02758187Courtesy of FORD MOTOR CO.
About FixVault