Transaxle Support Insulator: Installation

Clean the rear transaxle mount bolts using a wire brush and apply new threadlock and sealer to the threads.
Position the transaxle mount in place and install the bolts.
- Tighten to 55 Nm (41 lb-ft).
  
  Fig 1: Identifying Upper Transaxle Mount Retaining Bolts
  Courtesy of FORD MOTOR CO.
Install the rear transaxle mount.
- Tighten to 90 Nm (66 lb-ft).
  
  Fig 2: Identifying Bolts For Rear Transaxle Mount
  Courtesy of FORD MOTOR CO.