Front Toe Adjustment

Start the engine and center the steering wheel.
Turn the engine OFF, and hold the steering wheel in the straight forward position by attaching a rigid link from the steering wheel to the seat.
Remove the steering gear bellows clamps.

Fig 1: Removing Steering Gear Bellows Clamps
Courtesy of FORD MOTOR CO.
Loosen the nuts.
- Clean and lubricate the nuts and the tie-rod threads.
  
  Fig 2: Loosening Tie-Rod Nut
  Courtesy of FORD MOTOR CO.

NOTE: Do not allow the steering gear bellows to twist when the tie-rod is rotated.

Rotate the tie-rods as necessary to adjust the toe setting.
Tighten the nuts to 115 Nm (85 lb-ft).

Fig 3: Adjusting Toe Setting
Courtesy of FORD MOTOR CO.
Install the steering gear bellows clamps.
Recheck the toe settings. Follow the alignment equipment manufacturer's instructions.