FixVault
Home › Mercury › 2005 › Mountaineer 4.6 W, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Acceleration Control System › Removal And Installation › Accelerator Pedal - Fixed › Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the accelerator pedal electrical connector.
  3. Remove the nuts and the accelerator pedal assembly.
    • To install, tighten to 7 Nm (62 lb-in).
  4. To install, reverse the removal procedure.
About FixVault