FixVault
Home › Mercury › 2005 › Sable LS, 4D Wagon › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Driven Sprocket Support › Disassembly

Driven Sprocket Support: Disassembly

  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    Fig 1: Removing Teflon® Seal Rings & No. 5 Thrust Washer
    G03957107Courtesy of FORD MOTOR CO.
  2. Inspect the driven sprocket bearing for damage. If damage is indicated, install a new driven sprocket.
    Fig 2: Inspecting Driven Sprocket Bearing
    G03957108Courtesy of FORD MOTOR CO.
About FixVault