FixVault
Home › Mercury › 2006 › Montego Base, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine › In-Vehicle Repair › Valve Spring, Retainer and Seal › Installation

Valve Spring, Retainer and Seal: Installation

    NOTE: Lubricate the valve guide with clean engine oil.
    Fig 1: Identifying Special Tool
    G04655703Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the valve seal.
  2. Using the special tool, install the valve spring, retainer and key.
    Fig 2: Identifying Special Tool (303-473)
    G03898348Courtesy of FORD MOTOR CO.
  3. Install the camshaft roller followers. For additional information, refer to CAMSHAFT ROLLER FOLLOWER .
About FixVault