Transaxle Support Insulator: Installation

WARNING: This page is about a different variant/trim than selected.

Clean the rear transaxle mount bolts using a wire brush and apply new threadlock and sealer to the threads.
Position the transaxle mount in place and install the bolts.
- Tighten to 55 N.m (41 lb-ft).
Fig 1: Locating Transaxle Mount
Courtesy of FORD MOTOR CO.
Install the rear transaxle mount.
- Tighten to 90 N.m (66 lb-ft).

Fig 2: Locating Rear Transaxle Mount

Courtesy of FORD MOTOR CO.