Pinpoint Tests - Non OSC Equipped Vehicle: Notes
SPECIAL TOOL(S)
| Worldwide Diagnostic System (WDS) Vehicle Communication Module (VCM) with appropriate adapters, or equivalent diagnostic tool |
|
| 73111 Automotive Meter 105-R0057 or equivalent |
Any time an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.
Prior to carrying out the pinpoint tests check the following:
- Transmission fluid level
- Transmission fluid condition (burned, metal particles or discolored)
- Engine cooling system
- Other non-related transaxle DTC