Side Shaft Gear Assembly: Assembly

If removed, press the gear assembly into the cover.

Fig 1: Locating Gear Assembly
Courtesy of FORD MOTOR CO.

NOTE: A snap ring is required.

Fig 2: Locating Snap Ring

Courtesy of FORD MOTOR CO.

If removed, install a new snap ring.
Using the special tool, install a new rubber dust cover.

Fig 3: Identifying Special Tool (307-526)
Courtesy of FORD MOTOR CO.
Install a new side gear assembly O-ring seal.

Fig 4: Locating Side Gear Assembly O-Ring Seal
Courtesy of FORD MOTOR CO.