FixVault
Home › Mercury › 2006 › Montego Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - CVT › Disassembly And Assembly Of Subassemblies › Transmission Range (TR) Sensor › Disassembly

Transmission Range (TR) Sensor: Disassembly

  1. Remove the bolts for the transaxle range sensor and remove it from the valve.
    Fig 1: Locating Transaxle Range Sensor Bolts
    G04656724Courtesy of FORD MOTOR CO.
    2. NOTE: If damage is indicated on the manual valve a new housing assembly must be installed into the case.
    Fig 2: Locating Manual Control Valve
    G04656725Courtesy of FORD MOTOR CO.
  2. Remove and inspect the manual control valve.
About FixVault