Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper anchor bolts | 110 | 81 |
| Brake disc retainer | 21 | 16 |
| Rear axle wheel end nuta | 350 | 258 |
| Rear brake anti-lock sensor bolt | 14 | 10 |
| Hub bolts | 120 | 89 |
a Install and tighten the new rear axle wheel end nut to specification in a continuous rotation. Stopping the rotation during installation will cause the nylon lock to set incorrectly. This will cause incorrect torque readings while tightening the rear axle wheel end nut, and lead to bearing failure. Install a new rear axle wheel end nut every time after loosening or not installing the rear axle wheel end nut to specification in a continuous rotation.