FixVault
Home › Mercury › 2007 › Monterey › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Driven Sprocket Support › Assembly

Driven Sprocket Support: Assembly

  1. Make sure that the seals are mated correctly during installation.
    2. Fig 1: Properly Aligned Seal Ends
    GF0020254Courtesy of FORD MOTOR CO.
    CAUTION: The seal rings must be installed correctly. Transmission failure could result.
  2. Install new Teflon® seals and the No. 5 thrust washer.
    3. Fig 2: Teflon® Seal Rings & No. 5 Thrust Washer
    GF0020290Courtesy of FORD MOTOR CO.
About FixVault