FixVault
Home › Mercury › 2007 › Monterey › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Driven Sprocket Support › Disassembly

Driven Sprocket Support: Disassembly

  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    2. Fig 1: Teflon® Seal Rings & No. 5 Thrust Washer
    GF0020290Courtesy of FORD MOTOR CO.
  2. Inspect the driven sprocket bearing. If damage is found to the bearing, install a new driven sprocket.
About FixVault