FixVault
Home › Mercury › 2007 › Monterey › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › In-Vehicle Servicing › Digital Transmission Range (TR) Sensor › Removal

Digital Transmission Range (TR) Sensor: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Place the transaxle range selector in NEUTRAL.
    3. Fig 1: Identifying Transmission Range Positions
    GF0019989Courtesy of FORD MOTOR CO.
  3. Disconnect the mass air flow (MAF) sensor and the breather tubes.
    4. Fig 2: Locating Mass Air Flow (MAF) Sensor And Breather Tubes
    GF0019965Courtesy of FORD MOTOR CO.
  4. Remove the engine air cleaner lid.
    5. Fig 3: Locating Engine Air Cleaner Lid
    GF0020150Courtesy of FORD MOTOR CO.
  5. Remove the air filter assembly.
    6. Fig 4: Locating Air Filter Assembly
    GF0020151Courtesy of FORD MOTOR CO.
  6. Disconnect the digital transmission range (TR) sensor electrical connector.
    7. Fig 5: Identifying Digital Transmission Range (TR) Sensor Electrical Connector
    GF0020152Courtesy of FORD MOTOR CO.
  7. Remove the manual control lever and cable.
    • Remove the nut.
    • Remove the manual control lever and cable.
    8. Fig 6: Locating Manual Control Lever And Nut
    G04005358Courtesy of FORD MOTOR CO.
  8. Remove the 2 bolts and the digital TR sensor.
    9. Fig 7: Locating Digital TR Sensor Bolts
    GF0020154Courtesy of FORD MOTOR CO.
About FixVault