FixVault
Home › Mercury › 2008 › Sable Base, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems › General Procedures › Remote Memory Activation

Remote Memory Activation

  1. Position the seat and mirrors to the desired positions.
  2. Press the set button on the driver door trim panel.
  3. Within 5 seconds, press 1 of the 2 buttons on the driver door panel to associate with the driver 1 or driver 2 position.
  4. Press the set button again.
  5. Within 5 seconds, press a button on the associated integrated keyhead transmitter (IKT).
  6. Within 5 seconds, press 1 of the 2 buttons on the driver door panel to associate with the driver 1 or driver 2 position.
  7. If a second memory setting is desired, repeat the procedure with the second IKT.
About FixVault