Removal And Installation
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
- Disconnect the electrical connector from the ignition coil-on-plug.
- Remove the bolt from the ignition coil-on-plug.
- To install, tighten to 6 Nm (53 lb-in).
- Remove the ignition coil-on-plug.
- To install, reverse the removal procedure.