FixVault
Home › Mercury › 2009 › Sable Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 302 (Instrument Panel And Console) › Removal And Installation › Console - Overhead › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
    2. CAUTION: The overhead console bracket is supported by the headliner. Failure to follow the removal procedure will damage the headliner.
  2. Support the headliner at the rear corner of the overhead console and pull down on that corner to remove the overhead console.
    • Disconnect the 2 electrical connectors.
  3. To install, reverse the removal procedure.
About FixVault