Powertrain Control Module (PCM): Installation

All vehicles 

1. Install the PCM and the 2 bolts.
   • Tighten to 10 Nm (89 lb-in).
2. Connect the PCM electrical connectors.
3. Position the wiring harness and the A/C tube bracket(s) and install the nut(s). Connect the RH front wheel speed sensor electrical connector.
   • Tighten to 7 Nm (62 lb-in).

   Vehicles equipped with a 4.6L (3V) engine 

4. Install the ACL  . For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .

   All vehicles 

5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
6. Reprogram the Passive Anti-Theft System (PATS). Carry out the Parameter Reset procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .