FixVault
Home › Mercury › 2011 › Milan Base, Standard › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Valve Stem Diameter

Valve Stem Diameter

NOTE: Refer to the appropriate article in ENGINE MECHANICAL - 2.5L (EXCEPT HYBRID) , ENGINE MECHANICAL - 2.5L - (HYBRID) , ENGINE MECHANICAL - 3.0L (4V) or ENGINE MECHANICAL - 3.5L for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown in the illustration. Verify the diameter is within specification.
    Fig 1: Measuring Diameter Of Each Intake And Exhaust Valve Stem
    G07780471Courtesy of FORD MOTOR CO.
About FixVault