Radio Functions: Tone

The tone button enables the following scroll sequence to be activated: Bass-Treble-Fader Balance-DSP functions (if equipped). Adjustment of each option is via the volume control knob. To revert the tone settings to the original mid point settings the tone button should be held for approximately 2 seconds. The setting may then be reset or the tone functions are exited via the - button.

When the DSP amplifier is installed the final options in the tone sequence are the DSP Effects and Driver setting. Selections are made using the - - button and volume control knob. After the TONE LIN option is accessed, a further press of the Tone button will access the following scroll menu:

• Speed volume (GAL)
• TP Min - Sets Traffic announcement sound level
• PTY - Program Type Data. Can be set to Auto or Off
• RESET - Resets this menu to the original settings

Adjustment of each option is via the volume control knob or - - button.