61 13... Removing And Installing/Replacing Fibre-Optic Cable Connector

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Comply with notes and instructions on handling optical waveguides .

Necessary preliminary tasks:

Remove side section on rear seat backrest on left. See 52 26 008 REMOVING AND INSTALLING/REPLACING REST SIDE SECTION ON LEFT OR RIGHT REAR SEAT BACKREST .

Unlock catch (1) and remove deflection roller (2). Remove fibre optic cable (3) from deflection roller (2). Unlock catch on fibre-optic cable connector (5) with a suitable tool (4). Remove fibre-optic cable connector (5) in direction of arrow from deflection roller (2).

Fig 1: Identifying Fibre-Optic Cable Connector And Unlock Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).

Fig 2: Identifying Fibre-Optic Cable Connector And Raise Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise lock (1) and pull fibre optic cable (2) out of fibre optic cable plug (3). Installation: Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).

Fig 3: Identifying Fibre-Optic Cable Connector And Fibre-Optic Cable

Courtesy of BMW OF NORTH AMERICA, INC.