8610... Removing rear supports and bracket: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Tightening Torque, 86 10 26AZ .

Fig 1: Identifying Rear Support On Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cable holders (1) from bracket (2). Release screws (3) on left and right sides of bracket (2). Drill out rivets (4) from underside of platform. Drill out rivets (5) from upper side of platform.

Tightening Torque, 86 10 27AZ .

Fig 1: Identifying Cable Holder, Bracket Screws And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Feed cable for rear light (1) through opening (2). Fit cable holders (4) in holes (3).

Fig 1: Removing Cable For Rear Light From Opening

Courtesy of BMW OF NORTH AMERICA, INC.