8610... Removing wheel bearing: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Replace expanded or damaged snap rings (1). Ensure correct seating.

Fig 1: Removing Snap Ring

G04786718

Courtesy of BMW OF NORTH AMERICA, INC.

Press out wheel bearing with special tool 24 1 010.

CAUTION: Do not reuse old wheel bearing.

Fig 2: Pressing Out Wheel Bearing With Special Tool (24 1 010)

G04786719

Courtesy of BMW OF NORTH AMERICA, INC.

Place new wheel bearing (1) with lathe-turned end (2) in center of bore in brake drum (3).

Before pressing in new wheel bearing, check bearing seat for possible damage.

Make sure wheel bearing is not tilted when pressed in.

Fig 1: Identifying Wheel Bearing With Lathe-Turned End On Brake Drum

G04786720

Courtesy of BMW OF NORTH AMERICA, INC.

Press in new wheel bearing (1) with special tool 23 2 150 and 33 1 374.

Fig 2: Pressing Wheel Bearing Using Special Tools (23 2 150 And 33 1 374)

G04786721

Courtesy of BMW OF NORTH AMERICA, INC.