86 10... Disassembly of loading ramp frame/disassembly of rail, left/right
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Two persons are required to disassemble the loading ramp frame.
Disassembly of license plate mounting plate
REFER TO 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod
Disassembly of license plate mounting plate
REFER TO 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation
Tightening Torque,
Refer to TIGHTENING TORQUE 86 10 7AZ.
Release screws (1, 2) on left and right sides of loading ramp frame (3).
Installation
Use new self-locking nuts.
Tightening Torque,
Refer to TIGHTENING TORQUE 86 10 8AZ.
Release screws (1, 2, 3).
Installation
Use new self-locking nuts.
Tightening Torque,