86 10... Replacing 12 volt socket

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

From underside of platform, cut through cable tie (1) and remove. Disconnect plug with grommet (2) from socket (3) towards bottom.

Installation

Position all seals correctly. Also secure plug with grommet (2) using new cable tie to other socket.

Fig 1: Removing Cable Tie

Courtesy of BMW OF NORTH AMERICA, INC.

On upper side of platform, release Phillips screws (1) on mounting bracket (2).

Fig 2: Identifying Mounting Bracket With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound along white marking (1).

Installation

Make sure cable is correctly laid.

Use Sikaflex 221 as sealing compound.

Fig 3: Identifying White Marking On Sealing Compound

Courtesy of BMW OF NORTH AMERICA, INC.

Grip under mounting bracket (1) with a screwdriver and lever out bracket (1) towards top. Remove bracket (1).

Fig 4: Removing Mounting Bracket Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1). Remove socket (2) from mounting bracket (3).

Fig 5: Identifying Mounting Bracket With Socket And Nut

Courtesy of BMW OF NORTH AMERICA, INC.