Section 3263 (Cooling System - Repair (N54))
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
- Coolant, Checking Cooling System
- 17 00 009 Checking cooling system for water leaks
- 17 00 515 Checking function of radiator and heating system
- 17 00 008 Draining and adding coolant (N54, N54T)
- 17 00... Instructions for repair work on cooling system
- 17 00... Notes on retrofitting a trailer towing device
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 17 00 039 Venting and filling cooling system with vacuum filling unit
- Notes
- Lifetime coolant filling
- Recycling
- Preconditions
- After the cooling system has been filled with the vacuum filling unit, another bleeding procedure must be performed for the following vehicles
- After the cooling system has been filled with the vacuum filling unit, another bleeding procedure must be performed for vehicles with an electric coolant pump
- 17 00 039 Venting cooling system and checking for watertightness (N54)
- Radiator, Expansion Tank, Pipes
- Engine Radiator With Attachment
- 17 11 370 Remove and install or replace the cooling loop for hydraulic steering (N54, N54T, N52, N52K, N51, N53, S65)
- 17 11 035 Remove and install or replace the fan cowl with electric fan(N53, N54, N54T, N55)
- 17 11 046 Removing and installing / replacing module carrier
- 17 11 000 Removing and installing radiator (N53, N54, N54T)
- 17 11 063 Removing and installing/replacing both radiator brackets (N54, N54T, N52, N52K, N51, N53)
- 17 11 100 Removing and installing/replacing coolant expansion tank (N53, N54, N54T)
- 17 11 150 Removing and installing/replacing engine oil cooler (N54, N54T, N55)
- 17 11 190 Removing and installing/replacing engine oil pipe for oil cooler (N54, N54T, N55)
- Oil Cooler
- Charge Air Cooler With Mount