11 11 Engine block
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (ASA collar screw) | N63 | M11x102 | Replace screws | |
| Jointing torque | 20 Nm | |||
| Torque angle | 100 ° | |||
| 2AZ Bearing cap to crankcase (ASA collar screw 10.9) | N63 | M8x70 | Replace screws | |
| Jointing torque | 10 Nm | |||
| Torque angle | 55 ° | |||
| 3AZ Threaded support sleeves | N63 | Jointing torque | 6 Nm | |
| 4AZ Angled screw connection to crankcase | N63 | M8x37 | Flanged head screw 10.9 | 34 Nm |
| 5AZ Spacer bolt, oil pump | N63 | M8 | 34 Nm | |
| 6AZ Screw plug, water drain | N63 | M14x1.5 | Replace seal | 25 Nm |
| 7AZ Screw plug, main oil gallery rear and in V-space right | N63 | M18x1.5 | Replace seal | 25 Nm |
| 8AZ Oil nozzle to crankcase | N63 | M12x1 | 10 Nm | |
| 9AZ Special tool to crankcase | N63 | M8x35 | 20 Nm | |
| 10AZ Special tool to crankcase | N63 | M10x35 | 40 Nm | |
| 10AZ Special tool 11 8 930 to special tool 00 2 300 | N63 | M14x35 | 160 Nm |