51 45... Removing And Installing/Replacing Control Display Trim

WARNING: This page is about a different car, the 2005 BMW 760Li, 2004 BMW 760i, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required:

00 9 341

Unclip fresh air grill (1) with special tool 00 9 341.

Fig 1: Unclipping Fresh Air Grill

Courtesy of BMW OF NORTH AMERICA, INC.

Grip trim (1) through openings (2) from inside and unclip along wood trim towards top.

Fig 2: Removing Wood Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 2) must not be damaged.

Fig 3: Identifying Catches In Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert trim (2) in mounting of control display (1).

Do not damage wood trim on right. If necessary, snap locks of trim (2) into place with special tool 00 9 341.

Fig 4: Inserting Trim In Control Display

Courtesy of BMW OF NORTH AMERICA, INC.