61 31... Remount operating unit for additional seat function (clipped version)

Necessary preliminary tasks:

• REMOVE OPERATING UNIT OF ADDITIONAL SEAT FUNCTION 

Removal:

Release all latch mechanisms on the operating unit (1) using screwdriver (3-mm blade).

Fig 1: Releasing Latch Mechanisms On Operating Unit Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out the operating unit (1) from the rear panel (2).

Fig 2: Feeding Out Operating Unit From Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Fig 3: Printed Circuit Board And Operating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the button (1) using screwdriver (2) and pull out forwards.

Fig 4: Removing Button Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit the memory button to the operating unit and press to lock into place.

Fig 5: Memory Button

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Ensure keypads (1) are seated correctly.

Fig 6: Keypads

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Fig 7: Printed Circuit Board And Operating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Fit the operating unit (1) to the rear panel (2) and press to lock into place.

Fig 8: Operating Unit And Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

• Remove operating unit of additional seat function