11 11 Engine block
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Main bearing screws, observe tightening specification. | N18 | M9x115 | Replace screws. | |
| Jointing torque | 30 Nm | |||
| Angle of rotation | 150 ° | |||
| 2AZ Bedplate, observe tightening specification. | N18 | M6x35/M6x55 | Replace screws. | |
| Jointing torque | 9 Nm | |||
| 3AZ Screw plug, gear case upper section. | N18 | M22x1.5 | 35 Nm | |
| 4AZ Screw plug, gear case lower section. | N18 | M16x1.5 | Replace seal. | 32 Nm |
| 5AZ Oil spray nozzle to crankcase. | N18 | M10 | 20 Nm | |
| 6AZ Air conditioning compressor fixing. | N18 | M8 | 8 Nm | |
| 7AZ Retaining bolt (catalytic converter) to crankcase. | N18 | M8 | Bolt | 10 Nm |