FixVault
Home › Mini › 2013 › Cooper Clubman, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 576 (Heating And Air Conditioning - Repair Instructions) › Auxiliary Heater With Control Elements › 64 12... Initializing Independent Heating Remote Control

64 12... Initializing Independent Heating Remote Control

WARNING: This page is about a different car, the 2005 BMW 760Li, 2004 BMW 760i, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

The following steps are required for initializing a new independent heating remote control or after replacing the Car Access System control unit:

  1. Close and then reopen central locking with vehicle remote control.
  2. Within 5 seconds: Switch ignition lock from terminal "0" to terminal "R" and then back to terminal "0".
  3. Press and hold down "OFF" button on independent heating remote control.
  4. Press "ON" button on independent heating remote control 3 times in succession.

The vehicle's central locking closes and opens automatically on successful initialization.

NOTE: Both independent heating remote controls must be reinitialized after the Car Access System control unit has been replaced.
About FixVault