Vehicle programming and encoding

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In order to avoid incorrect programming procedures and error messages, it is essential when working with the Progman/ISTA/P programming system always to use the latest Progman version.
Battery voltage must not drop below 13.0 V during programming.
Connect battery charger prior to programming.

IMPORTANT: E72 only:

Before programming the vehicle, it is essential to disconnect the high-voltage system from the power supply.

Programming sequence via ISTA/P:

Identify vehicle and read out control unit data
Draw up and configure measures plan
Prepare programming, export CBS/CKM data
Carry out repair measures, replace control units if necessary
Identify vehicle again after repair. Update measures plan
Carry out programming
Assess programming afterwards, import CBS/CKM data
Programming successfully completed

Programming sequence via Progman:

Select menu item (1).

Select corresponding procedure from selection list.

For example:

Preparation and subsequent evaluation of vehicle programming
Start a Progman session
Sequence of BMW/MINI vehicle programming and encoding

Fig 1: Screen Display - Vehicle Programming And Encoding
Courtesy of BMW OF NORTH AMERICA, INC.
BMW/MINI Car & Key Memory
BMW/MINI initialization
BMW/MINI service functions in Progman
...