Fuel System - Repair (F57)

• 13 31 Fuel Delivery Pressure Check
  • Checking fuel delivery pressure (B36, B38, B46, B48) (Cooper)
• 13 51 High-Pressure Pump
  • Removing and installing/replacing the high-pressure pump (Cooper)
• 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
  • Clean the cylinder head in the area of the injectors with sandy/dusty contamination (Cooper)
  • Removing and installing/replacing feed line (B36, B38) (Cooper)
  • Removing and installing/replacing rail (B36, B38) (Cooper)
  • Removing and installing/replacing pressure line between rail and high pressure pump (Cooper)
  • Remove and install all injectors in the injection system (Cooper)
    • REP-TAT-P-1353-01 Remove injector
    • REP-TAT-P-353-02 Install injector
      • Notes
      • REP-TAT-p-1353-25 Reset ultra-small quantity adaptation
  • Removing and installing/replacing all injectors (B36, B38) (Cooper)
  • Replacing the rail pressure sensor (B36, B38) (Cooper)
  • Removing and installing/replacing feed line (B48, B46) (Cooper S)
  • Removing and installing/replacing rail (B48, B46) (Cooper S)
  • Remove and install all injectors in the injection system (Cooper S)
    • REP-TAT-P-1353-01 Remove injector
    • REP-TAT-P-1353-02 Install injector
      • Notes
      • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • Removing and installing/replacing all injectors (B48, B46) (Cooper S)
  • Replacing the rail pressure sensor (B48, B46) (Cooper S)
• 13 54 Throttle Body
  • Removing and installing/seal throttle body (B36, B38, B46, B48) (Cooper)
• 13 62 Coolant Temperature Sensor, Mass Airflow Sensor, Boost Pressure Sensor
  • Replacing the coolant temperature sensor (B36, B38, B46, B48) (Cooper)
  • Remove and install/replace hot film air mass meter (Cooper)
  • Replacing boost pressure sensor (upstream of throttle valve) (Cooper)
  • Replacing the boost pressure sensor (on the intake system) (Cooper)
• 13 71 Intake Silencer
  • Removing the acoustic cover (B36, B38, B46, B48) (Cooper)
  • Remove and install intake filter housing (Cooper)
    • REP-TAT-P-1371-01 Removing intake silencer housing
    • REP-TAT-P-1371-02 Installing intake silencer housing
  • Removing and installing/replacing intake silencer housing (Cooper)
  • Remove intake manifold for intake filter housing (Cooper)
  • Remove clean air pipe (B36, B38) (Cooper)
  • Remove clean air pipe (B48, B46) (Cooper S)
• 13 72 Engine Air Filter
  • Replacing air filter insert (Cooper)
• 13 90 EVAP Canister Purge Valve
  • Replace the tank vent valve (Cooper)