Section 94 (Body - Repair -- F55)
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Safety Information
- Body, General
- Information on vehicle protection
- Handling airbags and restraint systems
- Handling components after flood damage
- Handling electrical system and electronics
- 0 Notes on the repair technique used in body repair
- Procedure for vehicles with active pedestrian protection after an accident
- Spare parts standards
- Blind rivets
- Bonding instructions
- Bonding steel on steel
- Checklist for front seat
- Corrosion protection
- EMC screws
- 41 00... Stamping vehicle identification number
- 41 00... Frame reference dimension, body
- 41 00... Gap dimensions, body
- Instructions on matte paintwork
- General notes for labelling with adhesive films
- Grinding aluminium components
- Grinding steel parts
- Information on metal filler
- 41 00... Installation solution for straight shank/hexagon rivet nut
- Installing a cavity sealing with 2-component PU cavity foam
- 41 00... Installing cavity sealing (expanded)
- 41 00... Installing cavity sealing (not expanded)
- Labels
- Materials science
- Notes on adhesive K1
- Notes on adhesive K2
- Notes on adhesive K3
- Notes on adhesive K4
- Notes on adhesive K5
- Notes on adhesive K6
- Notes on cleaning agent R1
- 61 00... Notes on handling the high pressure cleaner
- Notes on repairing threads
- Notes on the water drain hose of the sliding/tilting sunroof
- Notes on using temperature-controlled infra-red radiators
- Opening bonded connections
- Opening brazed connections
- Open rivet connectors
- Opening welded connections
- Overview of additional work for the removal and installation or replacement of electronic components in the body area/windshield
- 41 00... Overview of adhesive cartridge guns
- Overview of consumables
- Position of shaped parts for cavity sealing
- Processing of 2K-PU-cavity foam
- Punch rivets
- Quality standard
- 41 00... Reinforcement plate with stud bolt (bonded)
- Repairing headlights
- Repairing plastic components
- 41 00... Repair solution for straight shank/hexagon rivet nut
- Repair methods, repair stage 1
- Repair techniques, repair stage 2
- Repair techniques, repair stage 3
- 41 00... Replace bolts
- 41 00... Replacing blind rivets
- 41 00... Separating cut determination with a template
- Setting blind rivet nuts and bolts
- Soldering steel components
- Spot-weld bonding steel components
- 41 00... Spray gun for cavity sealant
- Straightening aluminum component on the outer skin
- Straightening aluminum components in structure
- Straightening steel components in the structure
- Touching up paintwork damage
- 41 00... Welding in reinforcement plate (sheet steel)
- Welding steel components
- Workshop equipment
- Support Members
- 41 11 071 Replacing engine mount with left wheel arch in front of bulkhead
- 41 11 072 Replacing engine mount with front right wheel arch in front of bulkhead
- 41 11 091 Replacing engine mount in front of bulkhead, left
- 41 11 092 Replacing engine mount in front of bulkhead on right
- 41 11 095 Replacing engine mount in front of wheel arch, left
- 41 11 096 Replacing engine mount in front of wheel arch, right
- 41 11 205 Completely replacing the left carrier support
- 41 11 206 Completely replacing the right carrier support
- 41 11 311 Replacing entrance for door front left
- 41 11 312 Replacing entrance for front right door
- Luggage Compartment Floor Panels
- 41 12 557 Replacing middle luggage compartment floor (tail panel has been removed)
- 41 12 700 Replacing luggage compartment floor and side member on the left (rear quarter panel and tail panel removed)
- 41 12 701 Replacing luggage compartment floor and side member on right (rear quarter panel and tail panel removed)
- Wheel Arches
- (41 00... Stamping vehicle identification number)
- 41 14 020 Replacing front left wheel arch
- 41 14 030 Replace front right wheel arch
- 41 14 502 Replacing rear left outer wheel arch section with reinforcement (rear quarter panel removed)
- 41 14 503 Replacing rear right outer wheel arch section with reinforcement (rear quarter panel removed)
- 41 14 504 Replacing rear right outer wheel arch section (rear quarter panel removed)
- 41 14 505 Replacing rear left outer wheel arch section (rear quarter panel removed)
- 41 14 531 Replacing engine mount/front left side frame connection (front left wheel arch removed)
- 41 14 532 Replacing engine mount/front right side frame connection (front right wheel arch removed)
- Side Pillars And Reinforcements
- 41 21 003 Replacing A-pillar with reinforcement on left
- 41 21 004 Replacing A-pillar with reinforcement, right
- 41 21 013 Replace A-pillar, outer left
- 41 21 014 Replacing outer right A-pillar
- 41 21 201 Replacing B-pillar with reinforcement on left
- 41 21 202 Replacing B-pillar with reinforcement on right
- 41 21 203 Replacing B-pillar, outer left
- 41 21 204 Replace B-pillar on outer right
- 41 32 031 Replace the A-pillar on the outside left in the area of the windshield
- 41 32 032 Replacing outer right A-pillar in area of windshield
- 41 21 XXX Replacing left or right C-pillar reinforcement (tail panel and rear quarter panel removed)
- Roof Outer Skin
- Windscreen Frame / A-Pillar
- Front Trim Panel
- Rear Trim Panel
- Side Panels
- Front Doors
- Rear Doors
- Engine Compartment Lid
- 41 61 000 Removing and installing engine compartment lid
- 41 61 010 Removing and installing the engine compartment lid (active pedestrian protection)
- 41 61 014 Adjusting hood
- 41 61 563 Removing and installing/replacing the left or right hood hinge (hood removed)
- 41 61 564 Removing and installing/replacing the right hood hinge (hood removed)
- 41 61 571 Removing and installing/replacing hood hinge on left or right (hood removed) (active pedestrian protection)
- 41 61... Check hood hinge
- Procedure for vehicles with active pedestrian protection after an accident
- Tailgate
- Other Flaps