Section 27 (Engine - Repair (F57))

WARNING: This page is about a different variant/trim than selected.

11 00 Engine
- Handling components after flood damage
- Overview of consumables (BMW parts catalogue)
- Removing and installing engine with transmission (B36 engine) (Cooper base)
  - Notes
  - Repair notes for cylinder head or engine replacement
- Removing and installing engine with transmission (B48 and B46 engine) (Cooper S and John Cooper Works)
  - Notes
  - Repair notes for cylinder head or engine replacement
- Secure engine in installation position (F55/F56/F57)
- Checking all cylinders for loss of pressure (B36 engine) (Cooper base)
- Checking all cylinders for loss of pressure (B48 and B46 engine) (Cooper S and John Cooper Works)
- Engine identification
- Removing and installing/replacing acoustic cover (B48 and B46 engine) (Cooper S and John Cooper Works)
- Checking compression of all cylinders (B48 and B46 engine) (Cooper S and John Cooper Works)
- Commissioning the oil circuit (B48 and B46 engine) (Cooper S and John Cooper Works)
- Mounting engine on assembly jig (B36 engine) (Cooper base)
- Mounting engine on assembly jig (B48 and B46 engine) (Cooper S and John Cooper Works)
11 12 Cylinder Head With Lid
- Removing and installing/Seal cylinder head cover (B36 engine) (Cooper base)
- Removing and installing/replacing acoustic cover (B36 engine) (Cooper base)
- Removing and installing cylinder head (B36 engine) (Cooper base)
- Replacing cylinder head gasket (B36 engine) (Cooper base)
- Grinding cylinder head sealing surface (B36 engine) (Cooper base)
- Checking cylinder head on watertightness (B36 engine) (Cooper base)
- Removing and installing/sealing cylinder head cover (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing cylinder head (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing cylinder head gasket (B48 and B46 engine) (Cooper S and John Cooper Works)
- Milling cylinder head sealing surface (B48 and B46 engine) (Cooper S and John Cooper Works)
- Checking cylinder head for watertightness (B48 and B46 engine) (Cooper S and John Cooper Works)
11 13 Oil Pan
- Removing and installing, sealing or replacing oil sump (B36 engine) (Cooper base)
- Removing and installing, sealing or replacing oil sump (B48 and B46 engine) (Cooper S and John Cooper Works)
11 14 Housing Cover
- Removing and installing, sealing/replacing rear timing case cover (B36 engine) (Cooper base)
- Replacing rear crankshaft seal (B36 engine) (Cooper base)
- Detaching and attaching/replacing timing case cover on front at bottom (B36 engine) (Cooper base)
- Replacing front crankshaft seal (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing, sealing/replacing rear timing case cover (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing crankshaft seal at rear (B48 and B46 engine) (Cooper S and John Cooper Works)
11 15 Crankcase Ventilation
- Measuring the internal engine pressure (B36 engine) (Cooper base)
- Measuring the internal engine pressure (B48 and B46 engine) (Cooper S and John Cooper Works)
11 16 Component Carrier
- Removing and installing alternator bracket (B36 engine) (Cooper base)
- Removing and installing alternator bracket (B48 and B46 engine) (Cooper S and John Cooper Works)
11 21 Crankshaft With Bearing
- Replacing crankshaft (B36 engine) (Cooper base)
- Replacing all crankshaft main bearing shells (B36 engine) (Cooper base)
- Replacing crankshaft (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing all crankshaft main bearing shells (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replace lower crankshaft guide bearing shells (B48) (John Cooper Works)
- Replace crankshaft guide bearing shells (B48) (John Cooper Works)
11 22 Flywheel
- Removing and installing/replacing flywheel (B36 engine) (Cooper base)
  - Removal
  - Installation
- Removing and installing/replacing flywheel (B48 and B46 engine) (Cooper S and John Cooper Works)
  - Removal
  - Installation
- Replacing roller bearing for dual-mass flywheel (B36 engine) (Cooper base)
11 23 Vibration Damper
- Removing and installing/replacing vibration damper (B36 engine) (Cooper base)
- Removing and installing/replacing vibration damper (B48 and B46 engine) (Cooper S and John Cooper Works)
11 24 Connecting Rod With Bearing
- Replace all connecting rod bearings (B36 engine) (Cooper base)
- Replacing all connecting rod bearings (B48 and B46 engine) (Cooper S and John Cooper Works)
11 25 Piston With Rings And Bolts
- Removing and installing or replacing all pistons (B36 engine) (Cooper base)
- Replacing piston rings on all pistons (B36 engine) (Cooper base)
- Removing and installing/replacing all pistons (B48 and B46 engine) (Cooper S)
- Replacing piston rings on all pistons (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing or replacing all pistons (B48A) (John Cooper Works)
11 27 Counterbalance Shafts
- Removing and installing/replacing counterbalance shaft (B36 engine) (Cooper base)
- Removing and installing/replacing counterbalance shafts (B48 and B46 engine) (Cooper S and John Cooper Works)
11 28 V Belt With Belt TENSIONER And Idler Pulley
- Replacing drive belt for alternator (B36 engine) (Cooper base)
- Replacing tensioning device for alternator drive belt (B36 engine) (Cooper base)
- Removing and installing/replacing idler pulley for drive belt (B36 engine) (Cooper base)
- Tensioning/releasing of drive belt for alternator (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing drive belt for alternator (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing tensioning device for alternator drive belt (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing idler pulley for drive belt (B48 and B46 engine) (Cooper S and John Cooper Works)
11 31 Camshaft
- Notes on checking and adjusting the timing (B36, B37, B36, B46, B47, B48)
- Checking camshaft timing (B36 engine) (Cooper base)
- Removing and installing/replacing intake camshaft (B36 engine) (Cooper base)
- Removing and installing/replacing exhaust camshaft (B36 engine) (Cooper base)
- Replacing both timing chains (B36 engine) (Cooper base)
- Removing and installing/replacing chain tensioner (B36 engine) (Cooper base)
- Adjustment time of camshaft(s) (B36 engine) (Cooper base)
- Checking camshaft timing (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing intake camshaft (B48A/B46A) (Cooper S and John Cooper Works)
- Removing and installing/replacing exhaust camshaft (B48A/B46A) (Cooper S and John Cooper Works)
- Replacing both timing chains (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing the chain tensioner (B48 and B46 engine) (Cooper S and John Cooper Works)
- Adjusting timing of camshaft(s) (B48 and B46 engine) (Cooper S and John Cooper Works)
11 33 Rocker/Rocker Arm With Bearing
- Removing and installing/replacing all rocker arms (B36 engine) (Cooper base)
- Replacing all hydraulic valve clearance compensating elements (B36 engine) (Cooper base)
- Removing and installing or replacing all rocker arms (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing all hydraulic valve clearance compensating elements (B48 and B46 engine) (Cooper S and John Cooper Works)
11 34 Valves With Springs
- Replacing all valve springs (B36 engine) (Cooper base)
- Removing and installing or replacing all valves (B36 engine) (Cooper base)
- Replacing all valve stem seals (B36 engine) (Cooper base)
- Replacing all valve springs (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing or replacing all valves (B48 and B46 engine) (Cooper S and John Cooper Works)
- Replacing all valve stem seals (B48 and B46 engine) (Cooper S and John Cooper Works)
11 36 Variable Camshaft Timing Control
- Removing and installing/replacing intake camshaft adjuster (B36 engine) (Cooper base)
- Removing and installing/replacing exhaust camshaft adjuster (B36 engine) (Cooper base)
- Removing and installing or replacing intake and exhaust camshaft adjusters (B36 engine) (Cooper base)
- Removing and installing/replacing VANOS central valve on the intake side (B36 engine) (Cooper base)
- Removing and installing/replacing exhaust side VANOS central valve (B36 engine) (Cooper base)
- Removing and installing/replacing both VANOS central valves (B36 engine) (Cooper base)
- Removing and installing/replacing both VANOS actuators (B36 engine) (Cooper base)
- Removing and installing/replacing intake camshaft adjuster (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing exhaust camshaft adjuster (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing intake and exhaust camshaft adjusters (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing VANOS central valve on the intake side (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing exhaust side VANOS central valve (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing both VANOS central valves (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing both VANOS actuators (B48 and B46 engine) (Cooper S and John Cooper Works)
11 37 VALVETRONIC
- Removing and installing/replacing eccentric shaft (B36 engine) (Cooper base)
- Removing and installing/replacing intermediate levers (B36 engine) (Cooper base)
- Removing and installing/replacing servomotor for eccentric shaft (B36 engine) (Cooper base)
- Removing and installing/replacing eccentric shaft (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing intermediate levers (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing servomotor for eccentric shaft (B48 and B46 engine) (Cooper S and John Cooper Works)
11 40 Oil Supply
- Checking engine oil pressure (B36 engine) (Cooper base)
- Checking engine oil pressure (B48 and B46 engine) (Cooper S and John Cooper Works)
11 41 Oil Pumps With Strainer And Drive
- Removing and installing or replacing the oil pump (B36 engine) (Cooper base)
- Installing and removing/replacing hydraulic valve for oil pressure control (B36 engine) (Cooper base)
- Removing and installing or replacing the oil pump (B48 and B46 engine) (Cooper S and John Cooper Works)
- Installing and removing/replacing hydraulic valve for oil pressure control (B48 and B46 engine) (Cooper S and John Cooper Works)
11 42 Oil Filter And Pipes
- Removing and installing/replacing full-flow oil filter (B36 engine) (Cooper base)
- Removing and installing/replacing the oil feed line for the exhaust turbocharger (B36 engine) (Cooper base)
- Removing and installing/replacing the oil return line for the exhaust turbocharger (B36 engine) (Cooper base)
- Removing and installing/replacing full-flow oil filter (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/seal or replacing oil feed line for exhaust turbocharger (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/seal or replacing oil return line for exhaust turbocharger (B48 and B46 engine) (Cooper S and John Cooper Works)
11 44 Oil Cooler W Feed And Discharge Lines
- Removing and installing/replacing oil-to-water heat exchanger (B36 engine) (Cooper base)
- Removing and installing/replacing oil-to-water heat exchanger (B48 and B46 engine) (Cooper S and John Cooper Works)
11 51 Coolant Pump With Drive
- Removing and installing/replacing the coolant pump (B36 engine) (Cooper base)
  - REP-TAT-P-1151-01-9 Removing the coolant pump
  - REP-TAT-P-1151-02-6 Installing coolant pump
- Removing and installing/replacing coolant pump (B48 and B46 engine) (Cooper S and John Cooper Works)
11 53 Thermostat And Engine-Mounted Coolant Lines
- Removing and installing/replacing coolant thermostat (B36 engine) (Cooper base)
- Removing and installing/replacing the auxiliary water pump (B36 engine) (Cooper base)
- Removing and installing/replacing coolant thermostat (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing coolant return line for exhaust turbocharger (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing coolant feed line for exhaust turbocharger (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing auxiliary water pump (B48 and B46 engine) (Cooper S and John Cooper Works)
11 61 Intake System
- Removing and installing the intake system (B36 engine) (Cooper base)
- Removing and installing/replacing right charge-air duct (B36 engine) (Cooper base)
- Removing and installing/replacing left-hand charge air duct (B36 engine) (Cooper base)
- Removing and installing the intake system (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing right charge air duct (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing left-hand charge air duct (B48 and B46 engine) (Cooper S and John Cooper Works)
11 65 Charger With Control
- Removing and installing/replacing exhaust turbocharger (Cooper base)
- Removing and installing/replacing exhaust turbocharger (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing the adapter for exhaust turbocharger (B46, B48) (Cooper S and John Cooper Works)
11 66 Vacuum Pump
- Removing and installing or replacing vacuum pump (B36 engine) (Cooper base)
- Removing and installing or replacing vacuum pump (B48 and B46 engine) (Cooper S and John Cooper Works)
11 74 Exhaust-Gas RECIRCULATION Valve
- Replace electric valve for vacuum control of coolant pump (B48 and B46 engine) (Cooper S and John Cooper Works)
11 78 Co Adjustment, Oxygen Sensor
- Removing and installing/replacing the Lambda oxygen sensor (B36 engine) (Cooper base)
- Removing and installing/replacing the oxygen sensor monitor (B36 engine) (Cooper base)
- Removing and installing/replacing the Lambda oxygen sensor (B48 and B46 engine) (Cooper S and John Cooper Works)
- Removing and installing/replacing the oxygen sensor monitor (B48 and B46 engine) (Cooper S and John Cooper Works)