Section 14 (Fuel System -- Repair (F57))
WARNING: This page is about a different variant/trim than selected.
- 13 31 Fuel Pressure Check, Fuel Line
- 13 51 Fuel Injection Pump
- 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
- Cleaning the cylinder head in the area of the injectors with sandy/dusty contamination
- 13 53 156 Removing and installing high-pressure rail (Cooper S, Cooper JCW)
- 13 53 180 Replace pressure line (between high pressure pump and pressure accumulator)
- 13 53 318 Remove and install all injectors in the injection system (Cooper S, Cooper JCW)
- 13 53 596 Replacing fuel high-pressure sensor (Cooper S, Cooper JCW)
- 13 53 156 Removing and installing high-pressure rail (Cooper base)
- 13 53 318 Remove and install all injectors in the injection system (Cooper base)
- 13 53 596 Replacing fuel high-pressure sensor (Cooper base)
- 13 54 Throttle Body
- 13 62 Engine Sensors
- 13 62 531 Replace coolant temperature sensor (Cooper S, Cooper JCW)
- 13 62 537 Replace coolant temperature sensor (at coolant radiator)
- 13 62 560 Remove and install/replace hot film air mass meter
- 13 62 590 Replacing the pressure sensor (before throttle body)
- 13 62 591 Replacing the pressure sensor (after throttle body)
- 13 62 596 Replacing the differential pressure sensor for the gasoline particulate filter (Cooper S, Cooper JCW)
- 13 62 679 Replacing temperature sensor for oil/coolant (for 3rd cylinder on the crankcase) (Cooper S, Cooper JCW)
- 13 62 531 Replace coolant temperature sensor (Cooper base)
- 13 62 596 Replacing the differential pressure sensor for the gasoline particulate filter (Cooper base)
- 13 62 679 Replacing temperature sensor for oil/coolant (for 3rd cylinder on the crankcase) (Cooper base)
- 13 71 Intake Silencer
- 13 72 Engine Air Filter
- 13 90 EVAP Canister Purge Valve