Wheel Alignment Specifications
WARNING: This page is about a different car, the 1983 Plymouth Sapporo, 1983 Plymouth Colt, 1983 Dodge Ram 50, 1983 Dodge Colt, and 1983 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (COLT)
| Application | Specification | ||
|---|---|---|---|
| Front | |||
| Caster (Degrees) | +5/6 +/- 1/3 | ||
| Camber (Degrees) | 1/2 +/- 1/2 (2) | ||
| Toe-in (Inches) | Out 5/64 to In 5/32 | ||
| Toe-Out on Turns (Degrees) | |||
| Inner | 33 +/- 1 1/2 | ||
| Outer | 29 5/16 | ||
WHEEL ALIGNMENT SPECIFICATIONS (COLT & RAM-50 PICKUPS)
| Application | Specification | ||
|---|---|---|---|
| 2WD | |||
| Caster (Degrees) | 2 1/2 +/- 1 | ||
| Camber (Degrees) | 1 +/- 1/2 | ||
| Toe-in (Inches) | 5/64 +/- 5/16 | ||
| Toe-Out on Turns (Degrees) | |||
| Inner | 37 | ||
| Outer | 30 1/2 | ||
| 4WD | |||
| Caster (Degrees) | 2 +/- 1 | ||
| Camber (Degrees) | 1 +/- 1/2 | ||
| Toe-in (Inches) | 5/64 +/- 5/16 | ||
| Toe-Out on Turns (Degrees) | |||
| Inner | 30 3/5 | ||
| Outer | 28 | ||
WHEEL ALIGNMENT SPECIFICATIONS (CHALLENGER & SAPPORO)
| Application | Specification | |||
|---|---|---|---|---|
| Caster (Degrees) | 2 2/3 +/- 1/2 | |||
| Camber (Degrees) | 1 1/6 +/- 1/2 (1) | |||
| Toe-in (Inches) | 0 to 9/32 | |||
| Toe-Out on Turns (Degrees) | ||||
| Inner | 37 +/- 1 | |||
| Outer | 32 | |||
|
||||