Carburetor - MIKUNI 2-Bbl: Overhaul: Reassembly

To reassembly, reverse disassembly procedure. ensure that all air and fuel passages are clear. Lubricate linkage after cleaning. Check throttle and choke linkage for smooth operation.
Be sure that sub-EGR valve is operating smoothly. If a main or pilot jet is of the same size. A number is stamped on each jet.
To prevent carburetor-to-intake manifold gasket from being installed incorrectly, match holes of gasket to throttle body. Place gasket on intake manifold.

NOTE: For specifications, see ADJUSTMENTS .